Lynxmotion Tech Support

Hi all,

I have been trying to find a data sheet on the Next Step v2.0 Servo controller, I have tried looking on the main page, but have been unable to find anything in the old files. I realize that it is older in the scheme of servo controllers, but if anybody has a copy it would be greatly appreciated. Thanks for your time.

The old Next Step boards are nothing more than a slightly beefed up Parallax BOE. The board had the same DB9 programming port circuitry as the BOE. The Next Step had some led's and push buttons, but it's really a simple board. I will try to track down the schematic.

_________________
Jim Frye, the Robot Guy
http://www.lynxmotion.com
I've always tried to do my best...

I was unable to locate any files for that old board. Sorry...

_________________
Jim Frye, the Robot Guy
http://www.lynxmotion.com
I've always tried to do my best...

Thanks, for that... I will post up what I find and I might have to just do the schematic myself. I am putting a Arduino Mini in place of the stamp to control one of the older lynx motion claws. Thanks again for the help.